Key takeaways:
- A gate keypad authorizes entry, while a separate gate operator moves the gate and works with its safety devices.
- Choose how your team will manage access codes separately from how the keypad connects to the gate system.
- Compare operator compatibility, visitor needs and total project costs before choosing keypad hardware.

Keypad gate entry systems let residents, staff and approved visitors request entry with a PIN. If you’re replacing a keypad at a multifamily property, the right choice depends on more than the device: it must work with your gate equipment and make access manageable for your team.
This guide explains how gate keypad systems work, compares four options and separates keypad prices from installation and ongoing costs. You’ll also learn what to check for visitor access, outdoor use, safety and outages before requesting an installer proposal.
This guide will answer:
- How keypad gate entry systems work
- Choose the management model and connection method
- Decide whether a keypad covers visitor access
- Compare the specifications that affect daily use
- Four gate keypad options to consider
- What a keypad gate entry project costs
- Check compatibility, safety and outage behavior before installation
- Manage codes and maintain the system
Watch how ButterflyMX works:
How keypad gate entry systems work
Keypad gate entry systems check an entered PIN and authorize a compatible gate operator to open the gate. The keypad may check the code itself or pass it to an access controller, a separate device that manages permissions. The operator, not the keypad, physically moves the gate.
From PIN entry to gate movement
- A person enters a PIN at the keypad.
- The keypad or connected access controller checks whether the code has permission to enter.
- The system sends an open signal through a compatible connection.
- The gate operator moves the gate subject to its safety functions.
Two connection terms often appear in keypad specifications. A relay is a switch that can send a signal to a compatible operator. Wiegand is a reader-to-controller connection that passes credential information, such as an entered code. They perform different jobs, so the installer must match the keypad output to the equipment receiving it.
An accepted PIN doesn’t prove that the operator, safety devices or gate mechanics are working. Likewise, adding a keypad to a manual driveway gate won’t automate it. That project also requires a suitable operator, power and safety provisions, which a qualified gate installer should assess before you choose access hardware.
Choose the management model and connection method
Start with two separate decisions: how your staff will manage access codes and how the keypad will communicate with the gate system. Standalone and centrally managed describe administration. Wired and wireless describe communication. A wireless keypad doesn’t automatically offer remote code management.
Compare the options within each decision below, then look for products that support the combination your property needs.
Swipe to compare →
Central management reduces repeated administrative work, while wireless communication can reduce cabling work. Decide which problem you’re trying to solve before choosing hardware, because manufacturers don’t offer every combination.
Standalone or centrally managed access
A standalone keypad can be practical when staff rarely change codes and can easily reach the device. Some models have multiple relays, but those extra outputs don’t synchronize codes across separate keypads. If several entrances each require local programming, a resident move-out may mean updating several devices.
For example, one entrance used by a stable staff may be manageable locally, while a 300-home community with several gates can create repeated update work. The number of homes isn’t a product threshold. Gate count, resident turnover and staff workload determine whether central administration is worthwhile.
Map who updates each gate and how often those changes occur. For properties managing several entrances, this guide to gated community keypad entry systems explains how code policies fit into community-wide access management.
Wired or wireless communication
A battery-powered radio keypad can avoid a communication cable run, but wireless doesn’t mean power-free or internet-connected. Your team still needs to maintain the battery, and the keypad radio must work with the receiver.
Wired units need suitable cabling and power. Radio installations need attention to distance, obstructions and receiver compatibility. Neither approach is universally more reliable; the better fit depends on your entrance layout, existing equipment and maintenance routine.
Decide whether a keypad covers visitor access
A keypad works for someone who already has an authorized code. By itself, it doesn’t let an unexpected visitor speak with a resident or staff member. It may therefore meet the needs of a resident entrance but leave a visitor-heavy main lane without a way to request entry.
Temporary codes for planned arrivals
Temporary access can let you admit planned guests and vendors without sharing a permanent community code. Where the system supports it, you can end one visitor’s access without changing the code everyone else uses.
Check how each product limits access. A use-limited PIN stops working after a set number of uses, while a time-limited PIN works during a defined period. Confirm whether expiration happens automatically and what triggers it. The LiftMaster KPW250 supports 10 temporary PINs with limited-use settings; ButterflyMX offers Visitor Passes and Delivery Passes through its managed-access system.
Intercoms and mixed credentials for busier entrances
A busier entrance may need resident PIN entry, optional fobs or mobile credentials, and an intercom for visitors without a code. These serve different needs: routine entry, a choice of credentials and a way to request authorization.
Gate intercom keypads combine code entry with visitor communication. Comparing keypad access control with fobs and mobile access can also help you decide which resident entry methods to support.
Compare the specifications that affect daily use
The most useful specifications tell you whether your team can issue and remove access efficiently, support each entrance and maintain the equipment outdoors. Look beyond the maximum code count to understand how the system will work after installation.
Capacity, permissions and audit records
Count the unique credentials your property needs, then check how the product allocates them. Permanent codes, temporary codes and users assigned to separate outputs may have different limits. A second relay also doesn’t guarantee independent control of a second gate; that depends on the installation and controller logic.
Individual code removal lets staff revoke one resident’s or vendor’s access without changing everyone else’s PIN. Where supported, access logs record the credential, entrance and time, helping staff review an event. A shared or borrowed PIN still can’t prove who physically entered, and logging, record retention and wrong-code lockout settings vary by product.
Outdoor suitability, power and service needs
Outdoor ratings need careful reading because IP and NEMA are different rating systems, not interchangeable scores. LiftMaster specifies NEMA 4X-rated electronics for the KPW250, while Gate Depot lists an IP66 rating for the EMX KPX-100. Check which enclosure or component a rating covers before using it to judge suitability for your entrance.
Match the stated operating temperature range and mounting requirements to the location. Your site assessment should also cover sunlight exposure, moisture, lighting, available power and access for battery replacement. These outdoor keypad selection and weatherproofing considerations can help you organize the assessment.
Four gate keypad options to consider
These four options address different property needs, from a locally programmed wireless retrofit to centrally managed access across several entrances. ButterflyMX publishes this guide and offers the reader-plus-controller option included below.
Swipe to compare →
Choose the KPW250 when avoiding a communication cable run matters and your receiver is compatible. DoorKing and EMX offer wired configurations with local administration: DoorKing provides a 400-code capacity and Android programming on the 1515-080, while EMX allocates smaller user capacities to two separate relays. ButterflyMX suits a different priority, letting staff manage permissions centrally rather than programming each keypad. Its reader-plus-controller setup requires a broader installation than a standalone keypad replacement.
Before selecting a model, resolve the configuration details that affect your site. Code capacity must cover your users, outputs must match the equipment they control, and the environmental rating must suit the installation location. A detail marked for confirmation isn’t evidence that the feature is unavailable.
LiftMaster KPW250 for compatible wireless retrofits
LiftMaster specifies 250 permanent PINs and 10 temporary PINs for the KPW250, which controls one gate or door. Staff can remove an individual PIN at move-out without changing every resident’s code. Temporary PIN settings allow one to nine uses, making them useful for access that should end after a limited number of entries.
The keypad uses a 9V lithium battery, has NEMA 4X-rated electronics and carries a one-year accessory warranty. It avoids a communication cable run but still requires battery maintenance and programming at each device. Match both the operator and receiver to LiftMaster’s published compatibility chart; the brand name alone doesn’t establish compatibility.
DoorKing 1515-080 for locally managed access
DoorKing specifies up to 400 four- or five-digit codes for the 1515, with 12–24V AC/DC power and a Wiegand output or single Form C relay. The adjustable lockout can activate after three to nine incorrect attempts and last one to nine minutes, allowing the administrator to set a response to repeated wrong-code entries.
The 1515-080 supports local programming through the keypad or Android DKS Manager app. The app is an administrator tool, not evidence of cloud management or resident phone-based entry. A low-power solar mode may help an appropriately designed installation, but the keypad isn’t a complete solar gate package.
EMX KPX-100 for a smaller standalone entrance
Gate Depot lists the EMX KPX-100 with 100 users on relay 1 and 10 on relay 2, 12–24V AC/DC power, an IP66 rating and a two-year limited warranty. The user capacities belong to separate relays, so they don’t provide a pool of 110 interchangeable main-gate users.
The KPX-100 can suit a smaller entrance where local programming is manageable. Frequent turnover or several entrances increases the work of updating permissions separately. Have the installer confirm what each relay will control so the available capacity matches the intended use.
ButterflyMX Keypad with Access Controller for central management
The ButterflyMX Keypad is a reader within the ButterflyMX cloud Access Controller system. Staff can change permissions remotely and review supported access logs, reducing trips to individual devices. The system supports PIN, fob, card and mobile app access, along with Visitor Passes and Delivery Passes.
ButterflyMX also works with its intercoms and vehicle readers when the property needs visitor communication or vehicle credentials. Installation requires reader/controller connections, appropriate power, internet connectivity and a compatible gate interface. The hardware carries a two-year warranty, but the access system doesn’t replace the gate operator or entrapment protection.
What a keypad gate entry project costs
A keypad hardware price is only one part of the project budget. A controller or receiver, mounting equipment, site work and installation may be separate costs. The condition of your existing gate equipment also determines whether the proposal needs to include repairs or safety work.
Hardware-only retail examples
The following Gate Depot prices were recorded on November 17, 2026, in USD per keypad. Each amount covers keypad hardware, not an installed gate-entry system. Pricing and availability may change.
Swipe to compare →
Linear and MMTC provide additional hardware price examples beyond the four options above. These models have different specifications, so a higher listed price doesn’t establish better performance for your property. Check the required capacity, connection and included accessories, including whether you need a separate power supply, before comparing purchase costs.
Installation and ongoing cost items
Request an itemized proposal that separates equipment, site work and ongoing services. It should account for:
- The keypad and any controller or receiver.
- The pedestal, mounting hardware and enclosure requirements.
- Conduit, trenching, electrical work and connectivity.
- Labor, permits, programming and testing.
- Gate operator repairs or safety remediation.
- Recurring software or cellular services, where applicable.
- Maintenance, replacement batteries and ongoing service.
Usable power and conduit can affect the total project cost more than a small difference in keypad price. Compare proposals covering the same installation work and services so a lower equipment price doesn’t hide additional costs elsewhere.
Check compatibility, safety and outage behavior before installation
Replacing a keypad can uncover problems with the gate system beyond access control. Give a qualified gate installer the existing equipment details and request separate findings on compatibility, safe gate movement, emergency access and outage behavior. This helps distinguish a straightforward keypad replacement from a larger repair or upgrade.
Confirm the existing operator and connection
Document the operator model, receiver, power supply, proposed keypad location and the type of open signal the operator accepts. Include available conduit and network connectivity so the installer can identify which infrastructure can be reused.
Radio units must match both the receiver frequency and coding technology. Wired units need compatible electrical and control connections; the presence of a relay alone doesn’t establish compatibility. Reviewing gate access control and operator compatibility can help you define the equipment needed before buying a replacement.
Plan control placement and pedestrian separation
DASMA Technical Data Sheet 353 summarizes the seventh edition of UL 325 and identifies Class II applications as including multifamily housing with five or more units. Your installer must confirm the appropriate operator class and applicable requirements for the actual gate.
The DASMA summary highlights these design and safety considerations for the site assessment:
- Position gate activation controls at least six feet from the gate to reduce reach-through injury risk.
- Provide separate pedestrian access where pedestrian use is likely.
- Display warning signs on both sides of the gate.
- Provide the required independent entrapment protection, generally at least two means in each direction where entrapment is possible.
- Keep external entrapment sensors monitored, and never bypass monitoring.
- Evaluate gate construction against applicable ASTM F2200 considerations.
Keypad placement affects where drivers stop and reach, while pedestrian access and entrapment protection affect the safety of the whole entrance. These points support planning but don’t establish compliance. The installer and relevant local authority must determine which requirements apply to your gate.
Define emergency access and power-loss behavior
Plan separately for internet loss, keypad or controller power loss, and operator power loss. Backup power for an access controller doesn’t automatically keep the gate motor running, so a working keypad may still be unable to open the gate.
Have the installer document which credentials remain usable in each condition, whether the gate can move, how long backup power lasts and how staff restore normal operation. Test recovery during commissioning rather than assuming every system opens or keeps the gate closed during an outage.
If the gate crosses a fire access road, establish local approval requirements and an approved emergency-access arrangement with the relevant authority. Emergency access needs its own plan, separate from resident credentials and battery backup.
Manage codes and maintain the system
Assign one administrator responsibility for access management, and include code changes in move-in, move-out and vendor procedures. A consistent routine helps your team remove outdated access without disrupting residents who still need entry:
- Issue unique credentials where supported.
- Limit visitor and vendor access by time or use count when available.
- Revoke credentials when a resident moves out or a vendor contract ends.
- Review available access records and investigate unexpected activity.
- Schedule battery, enclosure and visible-damage checks according to the product manual.
Unique codes make individual revocation and record review more useful, but they can’t prevent people from sharing access. Keep routine inspections within the manual’s guidance, and leave electrical, operator and safety-device work to qualified service personnel.
Frequently asked questions
Why is my gate keypad not working?
A keypad that won’t power on may have a depleted battery or a power problem. If it accepts a PIN but the gate doesn’t move, the fault may involve the connection, operator or safety system. Follow the manual’s permitted power-indicator, battery and lockout checks, and contact the installer if the fault persists. Never bypass safety devices.
The right keypad gate entry system fits your access-management workload, works with your gate equipment and supports the people using the entrance. Start with gate count, resident and vendor changes, visitor communication needs and existing power and cabling. Then compare itemized proposals that include installation, safety work and ongoing services, not just keypad hardware.
If your property needs centralized permissions and several entry methods, discuss your entrance requirements with ButterflyMX to determine whether its Keypad and Access Controller configuration is a suitable fit.
Get your free quote!
Fill in the form below, and we'll email you right back.
Want a free quote?
Fill in the form below, and we'll email you right back.
Redirecting you in 5 seconds.